ANILOX ROLLER SYSTEMS Many lithographic printing machines now incorporate Anilox roller-based inking or coating systems and this presents new challenges for the operating staff. Type of Anilox material (ceramic or chrome), selection of anilox-cell dimensions, cleaning and maintenance are all critical in determining the lay-down of the coating or ink in use. Cleaning and preventative maintenance of the Anilox is essential. Hydro-Dynamic Products, in conjunction with a leading Anilox roller manufacturer, has developed effective user- friendly cleaning products which remove all dried ink and coatings from Anilox cells ensuring maximum volumes without damage to the roller.   FLEXOLV A general purpose cleaner for solvent and UV based products. Pumped around chamber system, Flexolv ensures quick colour changes and removal of ink and coating from Anilox cells. Use in conjunction with Loxolv gel for removal of dried ink from the Anilox roller. Flash Point >77ºC. Low odour, user friendly and will not damage Anilox rollers. Available in 5 litre, 25 litre and 1,000 litre containers.   LOXOLV Anilox roller cleaning gel for solvent and UV based products. Removes dried ink from Anilox cells. Can be applied to Anilox roller in the doctor chamber and flushed away by pumping Flexolv around the system or, off press, apply to Anilox and wash off by hand using Flexolv. Flash Point >77ºC, low odour, user friendly and will not damage Anilox roller. Available in 5 litre containers.		HYDROLOX Anilox roller cleaning gel for water based products. Removes dried ink from Anilox cells. Can be applied to Anilox roller in doctor chamber and flushed away by pumping Hydroflex around the system, or, off press apply to Anilox and wash off by hand using Hydroflex. Non corrosive, non flammable, will not damage Anilox roller. Available in 5 litre containers.   HYDROFLEX CONCENTRATE A concentrated general purpose cleaner for water based inks and coatings. Recommended dilution: 1 part Hydroflex concentrate to 10 parts water, but may be diluted with up to 50 parts water. Non corrosive, non flammable and will not damage Anilox roller when used at recommended dilution rate. Available in 5 litre, 25 litre, 205 litre and 1,000 litre containers.   ANILOX BRUSHES To aid the removal of hard dried ink and coatings from Anilox rollers. Brass: For use on chrome rollers only. Stainless Steel: For use on ceramic rollers only. All products are classified non hazardous under Supply, Handling and Transport Regulations. main menu